Permanent Red FGR 70 for Paints and Coatings
Pigment Red 112
Slightly higher opacity and considerably better rheological properties at higher pigment concentrations than Permanent Red FGR and therefore of particular interest for opaque full shades in the signal red range. Slightly lower tinctorial strength in reductions with titanium dioxide. Fastness properties virtually the same.
Customer Support
How can we help you?
Benefits
- High tinting strength and brilliance
- Good weather fastness
- Moderate solvent fastness properties
Technical data
Product Data
Application Profile
- Industrial Coatings
- Decorative Paints
Special Recommendations
| Air-drying Alkyds | ● | |
| Physically Drying Paints | ● | |
| Baking Enamels | ○ | |
| Acid Cured Paints | ● | |
| Amine Cured Epoxies | ○ | |
| Isocyanate Cured Paints | ○ | |
| Waterbased Paints | ● |
● recommended
○ limited suitability
– not recommended
Physical Data
| Density | [g/cm3] | 1.48 |
| Form of Supply | powder | |
| Specific surface | [m2/g] | 11 |
| Oil absorption | [ml/100g] | 48 |
| Avg. Size of Primary Particles | [nm] | 295 |
| Heat Stability | [°C] | 180 |
Fastness Data
| to Light | to Weathering | ||||||
| 12 month | 24 month | ||||||
| LOA | AM | LOA | AM | LOA | AM | ||
| Full shade | 7-8 | 8 | 4-5 | 4-5 | 4-5 | 4-5 | |
| Deep shade | 7-8 | 8 | 3-4 | 4 | 3 | 3-4 | |
| 1/3 ST | [1:4.4 TiO2] | 6-7 | 7-8 | 3 | 3-4 | 2-3 | 2-3 |
| 1/25 ST | [1:53 TiO2] | 6 | 6 | 3 | 3 | 2 | 2-3 |
| Acids | 5 | ||
| Water | 5 | ||
| Butyl Glycol | 3 | ||
| Methyl Ethyl Ketone | 2-3 | ||
| Xylene | 2-3 | ||
| Alkali | 5 | ||
| Butanol | 3-4 | ||
| Butyl Acetate | 2-3 | ||
| White Spirit | 4 | ||
| Dibutyl Phthalate | 3 | ||
| Blooming | Risk of blooming | ||
| Fastness to Overpainting | NC | AM (120°C) | AM (160°C) |
| 3 | 1 | 1 |
LOA- Air-drying Long Oil Alkyd
AM- Baked Alkyd-Melamine
NC- Nitrocellulose Combination Lacquer